Fireproof Board - HP
Product Description
Fitherm® HP is a non-combustible (Classification A1) fireproof board and does not contain asbestos and formaldehyde. The product has a low thermal conductivity, especially at high temperatures and possesses excellent mechanical properties. It can be processed easily by using typical carpenter’s equipment and is resistant to moisture.
Fitherm® HP can be used to build fire-resistant building systems like partition walls, ventilation and cable ducts, ceilings, floors, glazing parts as well as structural steel protection.
Technical Data
| Combustibility classification | non-combustible (class A1) E |
| Raw density | approx. 1.000 kg/m³ |
| Linear shrinkage at heat (at 70°C) | ≥ 1% |
| Thermal conductivity (at 70°C) | approx. 0,19 W/(m.K). |
| Flexural strenght | ≥ 10 MPa |
Applications
Fitherm HP boards can be used for:
- Ventilation and cable ducts
- Fire partition walls, ceilings and floors
- Fire glazing
- Steel structure protection
Availability
Fitherm HP is available in the following standard dimensions:
Thickness: 3.5, 4, 5, 6, 8, 10mm and 12mm. (other thicknesses on requist)
Lenght/Width: 1.220 x 2.440mm.
Fitherm HP cut-offs can be delivered in various sizes up to a maximum length of 2.440mm.
Storages and Processing
Fitherm HP should be stored under room conditions. During processing the wearing of protective gloves and dust mask is recommended
Some of our other fire proof products
